Dnp Lan Ied Diagnostics - ABB COM600 User Manual

1MRS755496
4.5.
Station Automation COM600 3.4
DNP 3.0 LAN/WAN Slave (OPC) User's Manual

DNP LAN IED diagnostics

The DNP LAN IED communication can be monitored with the Online diagnostics
function. You can also take a device into use or out of use as described in this section.
To monitor and control DNP LAN IED communication:
1. Select the device you want to monitor in the object tree of SAB600.
2. Right-click the device.
3. Select Online diagnostics.
In the Status information field, you can monitor the device status.
The Diagnostic counters field provides information on device activity. To reset diagnostic
counters, click Reset counters.
You can take a DNP LAN IED into use by marking the In use check box. If you unmark
the check box, the device is taken out of use. To manually update diagnostic counters,
click Refresh.
39