Dnp Lan Channel Diagnostics - ABB COM600 User Manual

4.4.
38
Station Automation COM600 3.4
DNP 3.0 LAN/WAN Slave (OPC) User's Manual
Figure 4.3-2 Event log file

DNP LAN Channel diagnostics

The DNP LANChannel activity can be monitored with the Online diagnostics function.
You can also take a channel into use or out of use as described in this section.
To monitor and control DNP LAN Channel activity:
1. Select the channel you want to monitor in the object tree of SAB600.
2. Right-click the channel.
3. Select Online diagnostics.
Figure 4.4-1 DNP LAN Channel Online diagnostics
In the Diagnostic counters field, you can monitor the channel activity. The available
attributes can be seen in Figure 4.4-1. To reset Diagnostic counters, click Reset counters.
You can take a DNP LANChannel into use by marking the In use check box. If you
unmark the check box, the channel is taken out of use. To manually update diagnostic
counters, click Refresh.
1MRS755496
A040347.jpg
A040348.jpg