Table of Contents
Advertisement
Selecting a Drive Mode
Available in the following modes:
You can change what the camera will do when you press the shutter button.
1
Press [
2
Press
then [MENU/SET].
[Single]
[Burst] (→142)
[Auto Bracket]
(→145)
[Aspect Bracket]
(→147)
[Self Timer]
(→148)
[Panorama
Shot]
*
This mode is not available when using [Snapshot Mode].
• To cancel drive mode, select [
"Single".
• When you press
however, that you cannot change the settings of [Single] and [Aspect Bracket].
141
] / (
).
to select the drive mode, and
When the shutter button is pressed, only one picture is taken.
Pictures are taken in succession as long as the shutter button is
pressed.
*
Each time the shutter button is pressed, a series of pictures is taken
with different exposure settings according to the selected interval.
*
When the shutter button is pressed, 4 pictures with 4 different aspect
ratios are automatically recorded.
When the shutter button is pressed, the picture is taken after the set
time has elapsed.
Exposures are recorded in succession while you press the shutter
button and move the camera horizontally or vertically. After that the
*
(→150)
camera combines them into a single panorama picture.
, you can change the settings of each drive mode. Note,
] ([Single]) or [
]. The recording is switched to
Shutter and Drive Settings
Drive Mode
Advertisement
Table of Contents
