Leica D-LUX 109 Instructions Manual page 223

• Pressing [WIFI] during a Wi-Fi connection enables the following operation.
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending Images]
[Register the Current Destination to
Favorite]
[Network Address]
●
Do not remove the memory card or battery or move to an area without any reception while
sending images.
●
The camera cannot be used to connect to a public wireless LAN connection.
●
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.
●
We recommend that you use a fully charged battery when you send pictures.
●
When the battery indicator is flashing red, the connection with other equipment may not start or
the connection may be disrupted. (A message such as [Communication error] is displayed.)
●
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
●
Pictures may not be completely sent depending on radio transmission conditions. If the connection
is terminated while sending pictures, pictures with missing sections may be sent.
●
The monitor display may become distorted for an instant while connected to the service, however
this will not affect the image being sent.
223
Terminates the Wi-Fi connection.
Terminates the Wi-Fi connection, and allows you to
select a different one.
For details (→246).
Registering the current connection destination or the
connection method, you can easily connect with the
same connection method next time.
Displays the MAC address and IP address of this unit.
(→247)
Wi-Fi and NFC Functions
®
Wi-Fi