Leica D-LUX 109 Instructions Manual page 288

■
Wi-Fi function
The camera does not connect to a wireless LAN. The transmission disconnects.
• Position the camera within the communication range of the wireless LAN network.
• Connection types and security setting methods are different depending on the wireless access
point.
→ Refer to the operating instructions of the wireless access point.
• When the radio transmission is interrupted, the condition may improve by repositioning the camera
or changing the angle of the wireless access point.
• When the camera is placed on a metal table or shelf, the connection may not be established easily
because the camera is affected by radio transmission. Keep the camera away from metal surfaces.
• The automatic connection may not work when the network SSID of the wireless access point is set
not to broadcast.
→ Set the network SSID of the wireless access point to broadcast.
• Is any device, such as microwave oven, cordless phone, etc., that uses 2.4GHz frequency
operated nearby?
→ Radio transmissions may get interrupted when used simultaneously. Keep the camera
sufficiently far away from such devices.
• Is the 5GHz/2.4GHz switchable wireless access point connected to other equipment using the
5GHz band?
→ The use of a wireless access point that can use 5GHz/2.4GHz simultaneously is recommended.
It cannot be used simultaneously with this camera if it is not compatible.
• When the battery indicator is flashing red, the connection with other equipment may not start or the
connection may be disrupted. (A message such as [Communication error] is displayed.)
• Perform [Reset Wi-Fi Settings] in the [Setup] menu.
288
Others
Q&A Troubleshooting