Table of Contents
Advertisement
Using a flash unit (supplied/optional)
1
Turn off the camera.
2
Remove the hot shoe cover.
3
Attach the flash unit.
4
Turn on the camera and the flash unit.
For details (→177, 261).
■
Flash
When the [ON/OFF] switch for the flash unit (supplied/optional) is set to [OFF], the flash
mode is set to [
is set to [
] (Auto).
When the flash unit is turned on, the camera automatically sets [
Eye Reduction), [
●
When [
] or [
detect red-eye and correct the picture data.
●
When [
] or [
Available menu items
You can set only the following menus.
Menu
[Rec]
[Motion Picture]
[Custom]
[Setup]
77
] (Forced Flash Off). When the switch is set to [ON], the flash mode
], or [
] based on the type of subject and brightness.
] is displayed, the [Red-Eye Removal] function is activated to automatically
] is selected, slower shutter speeds may be used.
[Picture Size] / [Quality] / [AFS/AFF/AFC] / [Burst Rate] / [Self Timer] /
[iHandheld Night Shot] / [iHDR] / [Time Lapse Shot] /
[Stop Motion Animation] / [Face Recog.]
[Rec Quality] / [AFS/AFF/AFC]
[Silent Mode] / [Guide Line] / [Remaining Disp.]
All menu items can be set. (→41)
Using Snapshot Mode
], [
Item
Recording mode
] (Auto/Red-
Advertisement
Table of Contents
