Table of Contents
Advertisement
■
Flash
I cannot perform [Flash] settings.
• The flash (supplied/optional) unit is not attached properly.
→ Properly attach it to the camera. (→177, 261)
• For details about flash settings, refer to (→177 - 184, 261).
No flash is emitted.
The flash becomes unavailable in the following cases.
• When the picture effect (Filter) is set
• When the camera is set to use [Auto Bracket], White Balance Bracket, or [Aspect Bracket]
• When using [Burst]
• During panorama picture recording
• When [HDR] is set to [ON]
• When the electronic shutter is used (→140)
→ Set [Shutter Type] to [AUTO] or [MSHTR].
• When [Silent Mode] is set to [ON] (→162)
→ Set [Silent Mode] to [OFF].
The flash fires twice.
• (Except when the [Firing Mode] of [Flash] is set to [MANUAL]) When red-eye reduction (→181)
is set, the firing interval will be longer. Make sure that the subject does not move until the second
flash.
285
Others
Q&A Troubleshooting
Advertisement
Table of Contents
