Leica D-LUX 109 Instructions Manual page 289

The wireless access point is not displayed. Or it cannot be connected.
• Check if the targeted wireless access point is in operating state.
• The camera may not display or connect to a wireless access point depending on the radio
transmission condition.
→ Perform the connection closer to the wireless access point.
→ Remove the obstacles between the camera and the wireless access point.
→ Change the camera's direction.
• The access point may not be displayed even if the radio transmission exists depending on the
setting of the wireless access point.
→ Check the settings of the wireless access point.
• The wireless access point may not be found depending on the radio transmission condition.
→ Perform the [Manual Input]. (→242)
• Is the network SSID of the wireless access point set not to broadcast?
→ It may not be detected when it is set not to broadcast. Enter and set the network SSID. (→241)
• Connection methods differ depending on the wireless access point.
→ Refer to the operating instructions of the wireless access point.
It takes long every time to connect to a smartphone.
• It may take longer time to connect depending on the Wi-Fi connection setting of the smartphone,
but it is not a malfunction.
The camera is not displayed in the Wi-Fi setting screen of the smartphone.
→ Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi settings of the smartphone.
289
Others
Q&A Troubleshooting