Focus and Exposure Memory Lock
Available in the following modes:
This function is useful when you want to take a picture of a subject outside the AF area
(AFLock) and/or for subjects whose brightness is above or below average (AE Lock).
1
Aim the AF frame at the main subject (in case it is to be placed
off-center), or at an other subject of average brightness (In
case it is significantly darker or brighter).
2
Press and hold [AF/AE] to lock the focus
and/or exposure settings.
• When you release [AF/AE], the focus and/or exposure
lock is canceled.
• Only exposure lock is set at the time of purchase.
3
While keeping [AF/AE] pressed, move the
camera to compose the picture, and then
press the shutter button fully.
• When [AE LOCK] is set, press the shutter button
halfway to focus, then fully to shoot.
Setting the function of the [AF/AE] button
→
[Custom] → [AF/AE Lock]
[AE LOCK]
[AF LOCK]
[AF/AE LOCK]
[AF-ON]
Maintaining/not maintaining the lock when [AF/AE] is released
→
[Custom] → [AF/AE Lock Hold] → [ON] / [OFF]
133
Locks exposure only.
• [AEL], aperture value, and shutter speed are displayed when the correct
exposure is achieved.
Locks focus only.
• [AFL], focus, aperture value, and shutter speed are displayed when the subject
comes into focus.
Locks focus and exposure.
• [AFL], [AEL], focus, aperture value, and shutter speed are displayed when the
subject is in focus and the correct exposure is achieved.
Autofocus is activated.
Focus and Exposure Settings
:
Focus is locked (AF Lock)
Need help?
Do you have a question about the D-LUX 109 and is the answer not in the manual?