Enabling/disabling the identification of in-focus subject parts
[Peaking]
→
[Custom] → [Peaking]
●
[Peaking] functions during Manual Focus or when you focus manually using [AF+MF].
[ON]
The edges of in-focus subject parts are highlighted in color.
[OFF]
The function is not active.
[Detect
Level]
[SET]
[Display
Color]
●
When [Peaking] is set to [ON], [
[LOW]) will be displayed.
●
When [Fn Button Set] (→37) in the [Custom] menu is set to [Peaking], you can switch the setting
in the following order every time the assigned function button is pressed: [ON] ([Detect Level]:
[LOW]) → [ON] ([Detect Level]: [HIGH]) → [OFF].
●
The sections with clear outlines highlighted as in-focus on the screen may vary depending on the
recording conditions.
●
The color used for highlighting does not affect recorded pictures.
The function is not available when the picture effect (Filter) is set ([Rough Monochrome]).
130
The detection level for in-focus sections is set.
When [HIGH] is set, sections to be highlighted are reduced, allowing you to
achieve a more precise focus.
Settings: [HIGH] / [LOW]
• The detection level setting does not affect the focus range.
Sets the highlighting color used for [Peaking].
Settings
The available color settings differ depending on the setting of [Detect
Level].
Changing the [Detect Level] setting also changes the [Display Color]
setting as follows.
[Detect Level]
[
[Display Color]
[
[
] ([Detect Level]: [HIGH]) or [
Focus and Exposure Settings
[HIGH]
] (Light blue)
] (Yellow)
] (Green)
Manual Focusing
[LOW]
[
] (Blue)
[
] (Orange)
[
] (White)
] ([Detect Level]: