Leica D-LUX 109 Instructions Manual page 242

■
When connecting with [Manual Input]
On the screen of step
(connecting by [From List])", select [Manual Input]. (→241)
Enter the SSID of the wireless access point you are connecting to, then select [Set].
• For details on how to enter characters, refer to "Entering Text" (→52).
Select the network authentication type.
• For information on network authentication, see the instructions of the wireless access point.
Select the encryption type.
• The type of settings that can be changed may vary depending on the details of network
authentication settings.
Network authentication type
[WPA2-PSK] / [WPA-PSK]
[Common Key]
[Open]
(When an option other than [No Encryption] is selected)
Enter the encryption key
●
Check the wireless access points instructions and settings when a saving wireless access point.
●
If no connection can be established, the wireless access point's radio transmission may be too
weak. Refer to "Message displays" (→269) and "Q&A Troubleshooting" (→280) for details.
●
Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
242
1
of "If you are not sure about the WPS compatibility
[TKIP] / [AES]
[WEP]
[No Encryption] / [WEP]
Encryption types that can be set
Wi-Fi
About Connections