Table of Contents
Advertisement
■
Battery
[This battery cannot be used]
• Use a genuine Leica battery.
• The battery cannot be recognized as terminals are dirty.
→ Wipe any dirt from the battery terminals.
■
Wi-Fi function
[Failed to connect wireless access point] / [Connection failed] / [No destination found]
• Check the following regarding the wireless access point.
→ The wireless access point information set on the camera is wrong. Check authentication type,
encryption type, and encryption key. (→242)
→ The power of the wireless access point is not turned on.
→ The setting of the wireless access point is not supported by the camera.
• Check the network setting of the destination.
• Radio transmissions from other devices may block the connection to a wireless access point.
→ Check other devices that are connected to the wireless access point and devices that use the
2.4 GHz band.
[No picture to send]
• This is displayed when there is no image to transmit due to the restriction of the destination.
Check the file type of the image to transmit. (→236)
[Connection failed. Please retry in a few minutes.] / [Network disconnected. Transfer stopped.]
• Radio transmission from the wireless access point is getting weak.
→ Perform the connection closer to the wireless access point.
• There is no reply from the server or it has exceeded the communication processing time.
→ Try again after a while.
• Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed.
→ Reconnect the connection again.
[Connection failed]
• Check the following regarding the smartphones you intend to connect.
→ The smartphone does not operate.
→ Change the access point to connect to in the smartphone Wi-Fi settings to this camera.
→ There is no free storage space on the smartphone.
270
Others
Message Displays
Advertisement
Table of Contents
