Table of Contents
Advertisement
●
If the surrounding temperature is high, or a motion picture is recorded continuously, [
displayed and recording may be stopped halfway through to protect the camera.
●
If Extended Optical Zoom is used before pressing the motion picture button, these settings will be
cleared, and the angle of view will change significantly.
●
Note that if you perform operations such as changing the focal length (zooming), using buttons or
dials while recording a motion picture, operation noise may be recorded.
●
The zoom speed will be slower than normal during motion picture recording.
●
The available recording time displayed on the screen may not decrease regularly.
●
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
●
If you stop recording motion pictures too soon after you have set picture effect (Filter) of [Miniature
Effect], the camera may continue recording for a certain time. Hold the camera steady until the
camera stops recording.
●
[ISO Limit Set] is disabled when you record motion pictures.
●
Even if you set [Stabilizer] to [
(Normal).
●
It is recommended to use a fully charged battery when recording motion pictures.
●
Motion pictures cannot be recorded in the following cases:
• During panorama picture recording
• When the picture effect (Filter) is set ([Rough Monochrome], [Silky Monochrome], [Miniature
*
Effect]
, [Soft Focus], [Star Filter], [Sunshine])
*
Only when recording motion pictures with [Rec Quality] of [4K]
• When using [Time Lapse Shot]
• When using [Stop Motion Animation]
190
] (Panning) when you record motion pictures, it is fixed to [
Recording Motion Pictures
Recording Motion Pictures
] is
]
Advertisement
Table of Contents
