Table of Contents
Advertisement
Light balance (approximation)
The exposure is appropriate.
Set a faster shutter speed and/or a larger aperture value.
Set a slower shutter speed and/or a smaller aperture value.
About T (time)
When you set the shutter speed to T (time) and fully press the shutter button, the shutter
opens. (for approximately up to 120 seconds)
When you press the shutter button again, the shutter closes. Use this function when you
want to keep the shutter open for an extended period, for example, to record pictures of
fireworks or night scenes.
• When you take pictures with the shutter speed set to T (time), make sure to use a fully
charged battery (→20).
• The light balance assist is not displayed.
• If you set the shutter speed to T (time) when [Sensitivity] is set to [AUTO], [Sensitivity]
will change to [200].
• You cannot use this function when the electronic shutter is used.
• You can use this function only in [Manual Exposure] Mode.
●
When you take pictures with the shutter speed set to T (time), we recommend
using remote recording with a tripod or smartphone as a remote shutter release
(→225, 231), in order to prevent camera shake.
●
When you take still pictures with the shutter speed set to T (time), the pictures
may have higher noise levels. If you want to reduce noise, we recommend taking
pictures by setting [Long Shtr NR] to [ON] in the [Rec] menu. (→113)
Enabling/disabling the preview of the selected aperture value and
shutter speed effects on the recording screen
→
[Custom] → [Constant Preview] (M Mode) → [ON] / [OFF]
●
This function is disabled when flash is used.
●
You can use this function only in [Manual Exposure] Mode.
87
Taking pictures using the exposure control modes
Recording mode
,
,
, and
Advertisement
Table of Contents
