Leica D-LUX 109 Instructions Manual page 291

■
TV, computer, printer
No image appears on the TV. The image is blurred or not colored.
• The connection is not correct (→249).
• The TV has not been switched to auxiliary input.
• Check the [Video Out] setting (NTSC/PAL) on the camera. (→47)
(With camera models 18 470 / 18 473)
The display on the TV and on the camera do not match.
• The aspect ratio may be incorrect or the edges may be cut off with certain TVs.
I cannot play motion pictures on the TV.
• A card is inserted into the TV.
→ Connect with an AV or an HDMI micro cable and play on the camera (→249).
The picture does not fill the TV screen.
• Check the [TV Aspect] settings (→47).
No sound is output from the camera speaker.
• When an AV or an HDMI micro cable is connected to the camera, no sound is output from the
camera.
HDTV Link (HDMI) is not working.
• Is the HDMI micro cable connected correctly? (→249)
→ Check that the HDMI micro cable is fully inserted.
• Is the camera's [HDTV Link] setting set to [ON]? (→49)
→ The input setting may not be able to be changed automatically with certain TV HDMI sockets.
In this case, please change the input setting with your TV's remote control (consult your TV
instructions for details).
→ Check the HDTV Link (HDMI) settings on the device you are connecting to.
→ Turn the camera off and on again.
→ Provided it has this function, turn the "HDTV Link control (HDMI device control)" setting on your
HDTV compatible TV to off and then to on again. (Consult your TV's instructions for details.)
The camera does not communicate with the computer.
• The connection is not correct (→254).
• Check whether the computer has recognized the camera.
→ Set the [USB Mode] to [PC] (→47).
→ Turn the camera off and then on again.
The computer does not recognize the card.
• Disconnect the USB cable connection and reconnect with the card in place.
• If there are two or more USB terminals on a single computer, try connecting the USB cable to
another USB terminal.
291
Others
Q&A Troubleshooting