Table of Contents
Advertisement
About
(Face/Eye Detection)
The camera automatically detects a person's face and eyes. The eye closer to the
camera will be in focus, while the exposure will be optimized for the face (when [Metering
Mode] is set to [
• The camera can recognize up to 15 registered faces. Only the eyes of the face that is in
focus can be detected.
When the camera detects a face, the AF area and the mark
indicating the eye to be in focus are displayed.
Yellow: When the shutter button is pressed halfway, the frame
turns green when the camera has focused.
White: Is displayed when more than one face is detected.
Other faces that are the same distance away as faces
within the yellow AF area are also focused.
●
You can change the position and size of the AF area and the eye to be focused on. (→121)
●
If [Metering Mode] is set to [
camera will adjust the exposure using the face of the subject. (→139)
●
If conditions prevent the face from being recognized, such as when the movement of the subject is
too rapid, the AF Mode setting switches to [
116
] (Multi Metering)).
] (Multi Metering) when [
Focus and Exposure Settings
] (Face/Eye Detection) is selected, the
] (49-area-focusing).
Using Autofocus
Eye determining for focusing
Advertisement
Table of Contents
