4)Throttle Hold Switch
There are GEAR switch,HOLD switch,D/R switch, MIX2、MIX12、FMD2、FMD12,
The factory default is HOLD switch
5) Settings: once finished the step2 , press DN to appear below interface,press R or L
to select switch
Setting method: once finished the step3 , press DN to appear below interface,press R
or L to select MIX or FMD switch,once finished the setting, press ENT to exit,
2.9 Device Output
Device output can set up the output switches and select the usage of levers,
respectively. It can also activate, inhibit or use other functions.
Setting method:
Press ENT in the main interface, main menu will be blinking, press UP or DN to
DEVO-7
Page 99 of 170