Governor - devention DEVO-7 User Manual

Press DN after FM 0 setting there will be appears FM 1 and FM 2 setting, please refer
to steps of FM 0 setting.
Press EXT to exit after finish.

3.10 Governor

Governor should be set at "Device Output" (Refer to "2.10 Device Output").
The control proportion of governor can be separately set in various flight modes. For
the absolute revolution amount, please set in external governor. The amount shown in
DEVO-7's governor is just a percentage for reference. The actual revolution should be
read in the external governor.
Setting method:
Press " ENT" button on the main interface until get flashing main menu. Press UP or
DN button to when " FUNCTION" flash, then press "ENT" to the function menu. Press
UP or DN button to until "GOVER" flash, press ENT button to flight mode interface,
press R or L to set the amount.
DEVO-7 Page 132 of 170