Reverse Switch; Travel Adjust) - devention DEVO-7 User Manual

and Exponential, Throttle Hold, Throttle Curve, Mix to Throttle, Gyro Sensor, Governor,
Tail Curve, Dual Pitch, Swash Mix, Pitch Curve, Program Mix, Monitor, Fail Safe,
Trainer, and Timer.

3.1 Reverse Switch

Press ENT to enter the flashing main menu, Press UP or DN to flash "FUNCTION",
and then press "ENT" to enter Function Menu; Press UP or DN to flash "REVSW";
Press ENT, Channel Name and flashing normal or reverse state will be shown. Press
R or L to change the NOR or REV state. Press DN, there are normal & reverse
switches in turn for AILE, THRO, RUDD, GEAR, PITCH, GYRO and so on. The
setting are the same as above, EXT it for finish.

3.2 (Travel Adjust)

Press ENT to enter Main Menu, press UP or DN until "FUNCTION" flash, and then
press ENT to enter Function Menu; Press UP or DN button to flash "TRVAD"; Press
ENT button to enter the enactment options for channel names and flashing travel
range. Press R or L to change the enactment value of travel range; Press DN button,
there are travel range enactment options in turn for AILE, THRO, RUDD, GEAR,
PITCH, GYRO and so on. The setting are the same as above, here we take the ELEV
as example. EXT it for finish.
DEVO-7 Page 42 of 170