Mix To Throttle - devention DEVO-7 User Manual

Press UP to return after the setting, then choose other point to set. Press EXT to exit
after the settings finished.

3.7 Mix to throttle

This function can keep the main rotor blades running at the certain revolution caused
by the changed load when operating the aileron servo, elevator servo, and rudder
servo. It is just used for stunt flight. Generally, It is not advised to use this function.
Setting method:
Press ENT to flash Main Menu. Press UP or DN to blink"FUNCTION", and then press
ENT to enter Function Menu; Press UP or DN until "MIXTH" flash; Press ENT to enter
Channel Option Interface; there are ELEV, AILE,RUDD available.
1.Channel setting
Press R or L to choose the channel ELEV that need to be set.
After chose the ELEV channel, press DN to enter Switch setting interface, it would be
shown as below:
2）Switch option
In above interface, Press ENT to enter Switch options and Switch state. There are
Switch options including ALLON (always on), NOR (normal mode), ST1(stunt 1),
ST2(stunt2),Gear.
ALLON(always on) option: It will be default always on if NOR (normal mode) or
DEVO-7 Page 51 of 170