devention DEVO-7 User Manual page 105

channel output function. The channel, which will be set as dual channel at AUX in
Device Output (Refer to "2.9 Device Output"), should be previously set as Inhibit when
the AUX channel is being set.
3.1Setting method:
Setting method:
Once finished setting V-TAIL , press DN to enter the dual channel setting interface,
see belows
Press R or L to select usable channel, the channel can be changable under below
circumastance.
A:Select "Normal"option in the wing type selection,,V-TAIL is inhibit options, the
channel setting options including Elevator, Aileron, Rudder, and Flap. Select
"Nor"options in the wing type selection,,V-TAIL is ACT options, the channel setting
options including Aileron, and Flap
B :Select "FLAP"option in the wing type selection,V-TAIL is inhibit option , the channel
setting options including Elevator, Rudder . Select "FLAP"option in the wing type
selection,V-TAIL is ACT option , the channel setting option will not appear
C: Select "DLETA"option in the wing type selection,,V-TAIL is inhibit option , the
channel setting options including Rudder, and Flap. Select "Nor"options in the wing
type selection,,V-TAIL can not be ACT
3.2）sub dual channel settings
DEVO-7 Page 105 of 170