Function Menu - devention DEVO-7 User Manual

2) Fixed ID cancellation
Insert the assorted BIND PLUG into the output terminal of BATTER before the
receiver is powered on, and then plug 5V DC power into one of the other output
terminals. The red light of receiver will flash slowly. This means the fixed ID code has
been cancelled. Pull out BIND PLUG.
DEVO-7 also needs to make relative cancellation and reversion after the fixed ID in
receiver is cleared out.
Take the fixed ID setting method as a reference .Press UP when below interface
shown.
Press R or L to change ON to OFF when below interface shown, and then press EXT
to exit.

3.0 Function Menu

Function Menu can help you make adjustments for the selected models.
CUSTOM
The menu includes such items as Reverse Switch, Travel Adjust, Sub Trim, Dual Rate
DEVO-7 Page 41 of 170