Device Output - devention DEVO-7 User Manual

Setting:After the setting 2), below interface will be shown after press DN.Press R or L
to choose corresponding switch.
Press EXT to exit after the settings.

2.9 Device Output

Device output can set up the output switches respectively. It can also activate, inhibit
or use other functions.
Setting:Press "ENT" key to enter Main Menu, press UP or DN until "MODEL" flash ,
and then Press "ENT" key to enter Model Menu; Press UP or DN button until
"OUTPU"becomes flash. The available GEAR,AUX2 options and switches will be
shown after press ENT.
1)Press R or L in OUTPU interface can change the gear switch. It includes FMD, MIX
D/R, HOLD,TRN and AUX2. The default setting is GEAR SW.
Press DN can enter the interface of Gear activate, inhibit or use other functions.
2)Press R or L can change activate, inhibit or use other functions which includes
INH,ACT and GYRO.
DEVO-7 Page 37 of 170