devention DEVO-7 User Manual page 72

Press ENT button then expand an enquiry "All Servos Hold?". Press R or L to
choose YES or NO. If "YES" selected, all the servos will be locked in the current
status, if " NO" selected, all servos are unlocked. Press ENT button to get program
mix 1 setting interface.
1) Setting of main channel: See below interface, press R or L to choose the required
main channel among ELEV, AILE, THRO, RUDD, GEAR, PITCH, AUX2, OELEV,
OAILE, OPITC, ORUDD, PELEV, PAILE, PTHRO, PRUDD and FMOD。
2) Setting of slave channel: after the setting of main channel finished, press DN button.
When getting to below interface, choose the required slave channel among ELEV,
AILE, THRO, RUDD, GEAR, PITCH and GYRO.
DEVO-7 Page 72 of 170