devention DEVO-7 User Manual page 131

Press DN after POS 0 setting there will be appears POS 1 and POS 2 setting, please
refer to steps of POS 0 setting.
Press EXT to exit after finish.
2 Automatic setting
This function can alter in different sensitivity automatically on flight mode. (at first
please make flight mode activated, refer to 2.9 setting)
Press R or L to select Automatic setting in Mode menu interface.
Press DN to enter FM 0 mode of auto setting, , press R or L to set the value. If the
gyro used has two modes of NOR and AVCS, AVCS activated when above 50.0%. in
AVCS mode, the bigger the value is, the bigger the gyro sensor gain will be. NOR will
be activated when the value is less than 50.0%, In NOR mode, the smaller the value
is, the bigger the sensitivity will be.
DEVO-7 Page 131 of 170