devention DEVO-7 User Manual page 153

Press ENT to confrim, then enter to program mix—setting menu. The adjustment
settings as follows: Master channel setting, Slave channel setting,position O,Position
1, Offset,throttle stick ,switch etc.
1）Master channel setting。(see below illustration) ,Press R or L key can Select the
desired channel. the channels are selectable: ELEV、AILE、THRO、RUDD、GEAR、
FLAP、AUX2、OELEV、OAILE、OTHRO、ORUDD、AUX2 .
2）Slave channel setting:Press DN after setting the master channel setting,then enter
to the slave channel setting.see below illustration. Press R or L key,select the
designed slave channel, the selectable channel as follows: ELEV、AILE、THRO、
RUDD、FLPRL、FLAP、AUX2。
3）Position O setting
Take ELEV as master channel for example.Press DN after finished the slave channel
setting.enter to the Position O setting interface.
3.1）Mix amount setting when elevator stick moved upward: Press R or L to decrease
or increase, separately, the mix amount. It is possible to reverse mix direction through
changing the plus or minus sign before amount. The adjustable range is ±125%.
DEVO-7 Page 153 of 170