Buzzer Warning - devention DEVO-7 User Manual

consumption will be increased if the backlight lightness is too bright and the battery
cruise duration will be shortened.
2）Backlight time out: it is possible to set the duration which LCD stays at highlight in
the form of Always on and duration from 5 to 60 seconds with an interval of 5 seconds.
SETUP: press ENT key in main interface, it appears twinkling main menu. Press UP
or DN to get twinkling SYSTEM, and then press ENT to enter system menu, press UP
or DN to get twinkling DISPL menu.
Press ENT key to enter brightness adjustment, you can adjust the brightness or turn
off the backlight by press R or L.
Press DN in above interface to enter backlignt time out setup, press R or L you can
adjust the backlight duration, 60 seconds is longest time, 0 means always on.
Press EXT to exit after finished.

1.2 Buzzer warning

1) Buzzer switch: Press ENT key in main interface, it will shows twinkling main
menu. Press UP or DN to get twinkling "SBUZZE", and press ENT to enter STATE
menu. Press R or L to make twinkling figure turn into ON or OFF. On means
active, OFF means inhibitive.
DEVO-7 Page 86 of 170