Throttle Hold - devention DEVO-7 User Manual

After FM1 setting finish, press DN to enter into FM2 interface, in the same way of
setting:
Press EXT after finish.

3.5Throttle hold

If this function is set, the switch will be executed by hold switch. The setting value of
throttle hold is ranged from -20.0 to 50.0。
Setting method:
Press ENT to flash main menu in main interface, press UP or DN to flash FUNCTION
and press ENT to enter into Function menu. Press UP or DN to flash THHLD, then
press ENT enter into throttle hold status. Press R or L to choose ACT(activate) or
INH(inhabit), the factory default setting is INH
If throttle hold is activated, there will be THROTTLE HOLD POSITION menu shown
2）Throttle hold position setting
To activate throttle hold, please press DN to enter below interface
DEVO-7 Page 115 of 170