Aileron To Rudder Mix - devention DEVO-7 User Manual

Setting the amount of FM 0: press R button, the amount to decrease the amount
within -125%, press L button to increase the amount up to +125%.
Press DN button when finishing FM 0 setting and then go to the setting interface of
FM 1 and FM 2. The setting methods are the same.
After finished, press EXT to exit.

3.11 Aileron to Rudder Mix

This function is possible to execute the mix of aileron to rudder, which is controlled by
switch.
Setting method:
Press "ENT" button on the main interface until get flashing main menu. Press UP or
DN button to when "FUNCTION" flash, then press "ENT" to the function menu. Press
UP or DN button to until "AI--RU" flash, press ENT button to Pos 0 left setting.
1）Pos 0 left setting:
Press R or L button to change the value of rudder mix when the aileron stick towards
left. The mix direction will be revised by changing the sign of plus or minus before the
value. The adjustable range is ±125%.
DEVO-7 Page 133 of 170