devention DEVO-7 User Manual page 164

linkage icon
Turn on the power of the trainer's transmitter,find out the trainee's model data,and let
the trainer's transmitter fly the aircraft model normally,then turn off the power. Insert
the other end of the digital signal wire into the trainer's.
3） Setting for training function channels
Trainee is available to get full or part of flight control power to the aircraft model via
setting the training function channelin the trainer's DEVO-7,Below is the setting
method:
Press ENT to show flash main menu.Press UP or DN until FUNCTION flash,repress
ENT to enter function menu; Press UP or DN until Train flashing,press ENT to enter
chanel selection.Press UP or DN, selecting controlled channel,press R or L to change
the controlling right of channel. INT is for "Inhibit; ACT is for being granted. Press EXT
to exit after finished.
DEVO-7 Page 164 of 170