Change Username - Sanav GX-101 Manual

4.1 Change Username

You can change the ID of GX-101 by following the format below. No space is allowed between the characters. For example,
if you send the SMS message shown in the example below to the GX-101, you will change the ID from "username" to
"ason"
Setup format： ＃「username」,「Password」,「Function Code」,「New username」*
Example：＃username,0000,1,ason*
The table 4.1.1 describes the meaning of each segment in the message above.
Text Keyed In SMS
#
username
0000
1
Ason
*
The table 4.1.2 shows each confirmation message reply after setup
Situation
Setup Succeeds
Setup Fail
Incorrect password
Incorrect username or command format
GX-101 is in Emergency Mode
Description
Start sign.
Default ID of GX-101
Default password.
If you have changed the password, please use the updated one.
Mode 1 defines the ID setup
New ID defined by the owner.
At the maximum of 8 letters.
End sign.
Message Reply
[username] + GX-101 username is updated.
[username] + GX-101 username setup fail!
[username] + Password setup Fail!
[username] + command error
[username] + in emergency, changing username is not allowed.
Table 4.1.2
Table 4.1.1
10