Classification Of Regrouped Radios; Requesting A Reprogram (Trunking Only); Dynamic Zone Programming; Entering The Dynamic Zone To Select A Dynamic Channel - Motorola APX 900 User Manual

Table of Contents

Advertisement

MN003441A01-AP
Chapter 7 : Advanced Features
7.1.5.1

Classification of Regrouped Radios

The dispatcher can classify regrouped radios into Select Enabled or Select Disabled categories.
Select Enabled
Select-enabled radios are free to change to any available channel, including the dynamic-
regrouping channel, once you have selected the dynamic-regrouping position.
Select Disabled
Select-disabled radios cannot change channels while dynamically regrouped. The radio is forced to
remain on the dynamic-regrouping channel.
The Scan and Private Call features are unavailable when your radio is Select Disabled.
7.1.5.2

Requesting a Reprogram (Trunking Only)

This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment.
Procedure:
Perform one of the following actions:
Press the preprogrammed Reprogram Request button to send a reprogram request to the
dispatcher.
or
to Rpgm then press the Menu Select button directly below Rpgm to send reprogram
request to the dispatcher.
The display shows Reprogram Rqst and Please wait.
If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows
Ack received and the radio returns to the Home screen.
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-
pitched alert tone and the display shows No acknowledge. Try again or press
return to the Home screen.
7.1.6

Dynamic Zone Programming

Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels for conventional or trunking.
NOTE: Your radio must be programmed for you to use this feature. At least one zone in the
radio must be a nondynamic zone.
7.1.6.1

Entering the Dynamic Zone to Select a Dynamic Channel

Procedure:
1
or
to Zone then press the Menu Select button directly below Zone.
The display shows the Zone screen.
2
or
to <# Dynamic Zone Channels>.
2
# indicates number of the channel on the 16-Position Switch which are numbered from 1 to 16.
50
2
to cancel and

Advertisement

Table of Contents
loading

Table of Contents