Setup Options - AMX DGX1600-ENC Hardware Reference Manual

8. Adjust the input gain by scrolling with the Control Dial.
The gain audibly adjusts as you scrolling the Control Dial.
9. Repeat Steps 1 through 8 as necessary for additional sources (inputs) that will be routed to the same destination (output).

Setup Options

The following options are available under the Setup Options submenu:
Software Version – to display software version information for the Control Panel

Master Info – to display information for the integrated Master*

Default VM – to change the factory default virtual matrix

Reload Config – is not used in normal operations; use only when directed to do so by technical support

Change Password – to change the password from the factory default

* Useful for quickly finding the system's IP address (Function/Setup Options/Master Info/IP Address).
Software Version
The Software Version Screen provides the following information:
Driver – Control Panel's firmware version

Built – date the Control Panel's software was built

Host – software version of the initial operating system (IOS) for the Control Panel

XNet ID – Control Panel's XNet device number

FP Link baud 9600 – indicates the Control Panel (FP = Front Panel) and the baud rate

Use the following steps to check the software version information for the Control Panel.
To check the software version information:
1. Press the Function Key.
The Function menu appears.
2. Locate Setup Options by scrolling with the Control Dial.
3. Press the Select Key.
The Setup Options submenu appears.
Locate Software Version by scrolling with the Control Dial.
4. Press the Select Key again to choose Software Version.
The Software Version Screen appears.
5. Scroll with the Control Dial to see additional Software Version information.
6. Press the Cancel Key to return to the Setup Options submenu.
Or
Press the Function Key to return to the Function menu.
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
Version number
Control Panel Operation
228