Adjusting Audio (Systems With Audio Switching Boards Only) - AMX DGX1600-ENC Hardware Reference Manual

Unlocking the Control Panel
When the panel is locked and you press any key, the Unlock Panel Screen appears. You have ten (10) seconds to enter the
password or the Control Panel remains locked. If you wait longer than 10 seconds, press any key again before entering the
password.
If you enter the wrong password while attempting to unlock the Control Panel, an invalid password message appears and the
Cancel Key flashes. Press the Cancel Key to clear the error and enter the correct password.
To unlock the Control Panel:
1. Press any key.
The Unlock Panel Screen appears (Input Keys 1 through 8 turn blue).
You must enter the password within ten (10) seconds.
2. Press the Input Keys in the following order: 1, 2, 3, 4, 5 (default password).
The panel unlocks and returns to the Function menu.

Adjusting Audio (Systems with Audio Switching Boards Only)

IMPORTANT: This section on Adjusting Audio does not apply to Audio Insert/Extract Boards.
If the Enova DGX System contains Audio Switching Boards (ASB or ASB-DAN), the control panel supports three Audio Modes for
adjusting the embedded audio: Output Volume, Mute/Unmute, and Input Gain. If Audio Switching Boards are not contained within
the enclosure, the Adjust Audio control panel option will be nonfunctional.
IMPORTANT: The Control Panel cannot directly access the audio on an Audio Switching Board. The Control Panel can only adjust the
audio from an Audio Switching Board after it has been embedded on a video board.
NOTE: Complete audio signal processing functionality is available via the System Configuration interface (see page 163) or via
SEND_COMMANDs (see page 181).
When the panel is placed in any of the Audio Modes, available keys will be blue and any unavailable ones will not be illuminated.
When you select a blue key, it turns white indicating that it is ready for the audio adjustment.
Audio Adjustments on the Control Panel
May be made at any time during normal operation

Are made in real time as the Control Dial is turned

Do not require pressing the Take Key

Remain in effect until changed

Can be made on any VM that contains audio

Affect only embedded audio on the digital signals (the Control Panel cannot access the Audio Switching Boards' audio only

inputs and outputs)
Adjusting Volume
The Adjust Volume Screen displays the current volume setting and the range available for the specific audio output signal that has
been selected for adjustment. For more information on audio signals and specifications, see the "Audio Switching Boards" chapter
on page 142. When audio is adjusted for an output signal switching on a VM containing audio, the adjustment remains in effect for
that destination when it is switched on any other VM containing audio.
Adjusting Output Volume
To adjust the volume:
1. Route the source (input) to the destination (output) to be adjusted (on any VM which includes the audio).
NOTE: Audio adjustments can be made without routing the switch.
2. Press the Function Key. The Function menu appears.
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
Control Panel Operation
225