Unpacking; System Setup With Transmitters And Receivers - AMX DGX1600-ENC Hardware Reference Manual

Unpacking

Enova DGX Switchers are shipped with one enclosure per shipping box. The invoice is sent separately; a packing slip is attached to
the outside of each box. Each box contains the following items:
□
Enova DGX 100 Series Digital Media Switcher
□
Two standard US power cords for the Enova DGX 800/1600/3200 (if shipped within the US)
Or
Four standard US power cords for the Enova DGX 6400 (if shipped within the US)
□
Other enclosure related products, as needed
The documentation in the first box includes:
□
AMX Enova DGX 100 Series Digital Media Switchers Quick Start Guide
□
AMX Enova DGX Audio Insert/Extract Board Quick Start Guide
□
Control Panel Custom Label Kit (for inputs and outputs and for LCD Function menu)
For orders comprising multiple enclosures, the shipping boxes are marked as "Chassis __ of __," where the first blank is the box
number and the second blank is the total number of boxes in the shipment.
Unpacking Tips
□
Before fully unpacking the enclosure, inspect the shipping box for any signs of damage. If a box is partially crushed or any sides
have been broken open, notify the shipping agency immediately and contact your AMX representative (see the warranty at
www.amx.com).
□
Once unpacking is complete, closely check the physical condition of the enclosure.
□
Collect all documentation.
NOTE: Please save the original shipping container and packing materials. AMX is not responsible for damage caused by insufficient
packing during return shipment to the factory. Shipping boxes are available; contact your AMX representative for details.

System Setup with Transmitters and Receivers

The next three sections cover system setup options for Enova DGX boards and their compatible TXs and RXs.
The following general statements apply to all three sections:
In each section's table where "Any input board" or "Any output board" is shown, check in the specific board's chapter to

determine whether or not a transmitter or receiver is required.
The transmitters and receivers mentioned in each section can be used as a standalone pair (end-to-end solution). For

additional information, see the applicable manual for the modules/units.
CAUTION: If you plan to connect switching systems via their DXLink ports, be sure to read the information on page 90.
Options for System Setup with DXLink Twisted Pair
The following table contains the options in an Enova DGX Switcher for using DXLink Twisted Pair Input and Output Boards in
conjunction with DXLink Twisted Pair Transmitters and Receivers.
System Setup Options – Enova DGX Boards with DXLink Modules/Wallplates
DXLink Module/Wallplate
Multi-Format TX Module
Multi-Format TX Module
Multi-Format Wallplate TX
Multi-Format Wallplate TX
Decor Wallplate TX
Decor Wallplate TX
Not Applicable
A typical system setup for a source and destination is illustrated on page 88 and shows an Enova DGX 1600 with DXLink Twisted
Pair Boards used in conjunction with DXLink Twisted Pair Transmitters and Receivers.
NOTE: Solecis Digital Switchers have a DXLink Twisted Pair output port that optionally provides source point switching and distance
transmission to an Enova DGX DXLink Twisted Pair Input Board for hub-style or campus-wide distribution.
IMPORTANT: Before connecting a Solecis Digital Switcher to a DXLink Twisted Pair Input Board in an Enova DGX 100 Series Digital
Media Switcher, both the Solecis unit and all DXLink Twisted Pair boards must be upgraded with the latest available firmware versions.
Solecis units must be upgraded before connecting a unit to an upgraded input board.
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
Enova DGX Input Board
 DXLink Twisted Pair

DXLink Twisted Pair

DXLink Twisted Pair

DXLink Twisted Pair

DXLink Twisted Pair

DXLink Twisted Pair
Any input board 
Enova DGX Output Board
 DXLink Twisted Pair 
 
Any output board
 
DXLink Twisted Pair
 
Any output board
 
DXLink Twisted Pair
 
Any output board
DXLink Twisted Pair 
Installation and Setup
DXLink Module
HDMI RX Module
Not applicable
HDMI RX Module
Not applicable
HDMI RX Module
Not applicable
HDMI RX Module
39