Enova Dgx 4K Hdmi Boards - Specifications - AMX DGX1600-ENC Hardware Reference Manual

Enova DGX 4K HDMI Boards – Specifications
This section applies to 4K HDMI Input Board FG1061-540. Specifications for HDMI Input Board (FG1058-540) and HDMI Output
Board (FG1058-550) begin on page 63.
4K HDMI Specifications
Compatible Formats
Signal Type Support
Video Data Rate (max.)
Video Pixel Clock (max.)
Progressive Resolution Support
Interlaced Resolution Support
Resolution Support
HDMI Cable Requirement
Input Equalization
Input Re-clocking (CDR)
Deep Color Support
Color Space Support
3D Format Support
Audio Format Support
Audio Resolution
Audio Sample Rate
Audio Switching Board Support
DDC/EDID Support
HDCP Support
CEC Support
Input Propagation Delay
Output +5 V DDC Pin
Connectors
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
HDMI, HDCP, DVI
• HDMI
• DVI-D (single link with HDMI cable adapter)
• DisplayPort ++ (Input only, with HDMI cable adapter)
8.91 Gbps (max)
297 MHz
480p up to 4096x2160p,60 Hz*
*Y/Cb/Cr 4:2:0 & 4K RX Scaler in Bypass
NOTE: See full list of supported formats on page 66.
480i, 576i, 1080i
NOTE: If input is interlaced, all scaled outputs will deinterlace video to a progressive
resolution format. If in scaler Bypass mode interlaced input will pass through unaltered.
3840x2160p@24/25/30 Hz
4096x2160p@24/25/30 Hz
3840x2160p@60 Hz, 4:2:0*
4096x2160p@60 Hz, 4:2:0*
* Supported by DX-RX-4K when in Bypass Scaling mode.
HDMI High Speed Cable, Category 2, Required
Yes, adaptive to 21 ft. (7 m)*
*Cable distance support dependent on cable quality and signal format.
Yes
24-bit, 30-bit, 36-bit
30-bit and 36-bit are only supported when the HDMI Output Board or DXLink RX Scaler is in Bypass
mode and format is 1080p60 or less.
RGB 4:4:4
YCbCr 4:4:4, 4:2:2, and 4:2:0
• Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
• 4:2:0 only supported at 2160p 50/60 Hz with 4K RX Scaler in Bypass
• Frame Packing 1080p up to 24 Hz
• Frame Packing 720p up to 50/60 Hz
• Frame Packing 1080i up to 50/60 Hz
• Top-Bottom 1080p up to 24 Hz
• Top-Bottom 720p up to 50/60 Hz
• Side-by-Side Half 1080i up to 50/60 Hz
NOTE: The Scaler on corresponding output board or RX must be set to Bypass mode.
Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM
• Dolby Digital and DTS support up to 48 kHz, 5.1 channels
16 bit to 24 bit
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
• Supports break-away audio switching of 2 CH L-PCM for all channels
• Supports downmix from one input channel of Dolby True-HD, Dolby Digital, DTS-HD, DTS, or 2 to
8 channel L-PCM
• EDID provided by Enova DGX Digital Media Switcher
• EDID is user re-programmable
Yes, full matrix HDCP 1.4 support (includes any input to any or all outputs)
• Key Management System
• AMX HDCP InstaGate Pro® Technology
• Key support up to 16 devices per output, independent of source device
None
2 μs
N/A
4 HDMI Type A female ports
Enova DGX HDMI Boards
65