Emulation - Konica Minolta magicolor 7450 Service Manual

Field Service Ver. 1.0 May 2006
9.8.2

EMULATION

A. DEF. EMULATION
Function • To set the PDL (Page Description Language).
Use • To fix the PDL as necessary. It usually switches automatically.
Setting • The default setting is AUTO.
/procedure
B. POSTSCRIPT
(1) WAIT TIMEOUT
Function • Sets the amount of time to wait for a PostScript file.
Use • To set the amount of time to wait for a PostScript file before the print job times out.
Setting 1. Select [WAIT TIMEOUT] and press the MENU/SELECT key.
/procedure 2. Select desired time with the Up key /Down key
key.
• The default setting is 0 second.
(2) PS ERROR PAGE
Function • Specifies whether error pages are printed at the time of a PostScript error.
• To specify whether error pages are printed after a PostScript error occurs.
Use ON : Error pages are printed at the time of PostScript error.
OFF : Error pages are not printed at the time of PostScript error.
Setting • The default setting is OFF.
/procedure
(3) PS PROTOCOL
Function • Sets the protocol to be used for PostScript printing.
• To use the protocol when printing by PostScript printing.
AUTO
Use
NORMAL : ASCII letter code data
BINARY : Binary data
Setting • The default setting is AUTO.
/procedure
C. PCL
(1) CR/LF MAPPING
Function • Sets the linefeed code for PCL printing.
Use • To specify the type of linefeed to be used for PCL printing.
Setting • The default setting is "CR=CR LF=LF."
/procedure
"CR=CR LF=LF" CR=CRLF LF=LF
"AUTO" POSTSCRIPT
"0" second to 300 seconds.
ON
: Automatic recognition
"AUTO"
and press the MENU/SELECT
"OFF"
NORMAL
CR=CR LF=LFCR CR=CRLF LF=LFCR
9. Menu
PCL
BINARY
123