Konica Minolta magicolor 7450 Service Manual page 163

9. Menu
(2) CUSTOM SIZE
Function • Sets the custom media width and length.
Use • To set the width and length of the custom media size.
Setting 1. Select [CUSTOM SIZE] and press the MENU/SELECT key.
/procedure 2. Select [WIDTH] or [LENGTH] and press MENU/SELECT key.
3. Set desired number with the Up key /Down key
key.
For North America
• The default setting of WIDTH is 8.50 inches.
WIDTH: 3.55 inches to 12.25 inches.
• The default setting of LENGTH is 11.00 inches.
LENGTH: 5.52 inches to 18.00 inches.
For other destinations
• The default setting of WIDTH is 210 mm.
WIDTH: 90 mm to 311 mm.
• The default setting of LENGTH is 297 mm.
LENGTH: 140 mm to 457 mm.
NOTE
• By changing the [UNIT OF MEASURE] setting (INCHES/MILLIMETERS), the
custom size units are changed.
(3) PAPER TYPE
Function • Sets the default media type.
Use • To set the default media type.
Setting • The default setting is PLAIN PAPER.
/procedure
"PLAIN PAPER" /RECYCLED /THICK 1 /THICK 2 /THICK 3 /LABEL
/TRANSPARENCY /TRANSPARENCY 2 /ENVELOPE /POSTCARD /LETTERHEAD /
GLOSSY
B. DETECT PAPER SIZE
Function • Sets the standard for the automatic paper size detection.
Use • To switch the criteria for the automatic paper size detection from Inch to Milli Meter.
Setting For North America
/procedure • The default setting of WIDTH is INCHE SIZE.
For other destinations
• The default setting of WIDTH is MILLIMETER SIZE.
126
INCHE SIZE
Field Service Ver. 1.0 May 2006
and press the MENU/SELECT
MILLIMETER SIZE