Konica Minolta magicolor 7450 Service Manual page 205

Hide thumbs Also See for magicolor 7450:
Table of Contents

Advertisement

11. SERVICE MENU
(2) TRAY1 ADJ-MAX
Functions
• To set the maximum width for the Manual Bypass Paper Size Unit of the Manual
Bypass Guide.
Use
• Use when the Manual Bypass Paper Size Unit of the Manual Bypass Guide has been
changed.
• Use when a false paper size is displayed when the Tray 1 is used.
Setting/
1. Select [TRAY1 ADJ-MAX] and press the MENU/SELECT key.
Procedure
2. Load the Tray 1 with paper having a width of 311 mm or 12.25 inches.
3. Select [EXECUTE] and press the MENU/SELECT key.
(3) TONER REPLENISH
Functions
• To adjust the set T/C level by replenishing an auxiliary supply of toner when a low ID
occurs due to a lowered T/C after large numbers of prints have been made of origi-
nals having a high image density.
Use
• When there is a drop in T/C.
Setting/
1. Select [TONER REPLENISH] and press the MENU/SELECT key.
Procedure
2. Select desired color with the Up key/Down keys and press the MENU/SELECT key.
(Select [ALL COLORS] for supplying toner for all colors at one time.)
3. Touching the MENU/SELECT key will detect the current toner density, and supplies
the toner when the level is lower than the standard. It will then be stirred.
4. Operation described on step 3 will be repeated maximum of four times until it
reaches to the standard value. When the value is above the standard, it only stirs.
5. [TONER REPLENISH COMPLETED] will be displayed when the toner is normally
supplied.
(4) PH SKEW ADJ
• This menu will not displayed during Error, Warming up, and Calibration.
<CAUTION STATUS>
Functions
• Displays the Device Caution Information in hexadecimal number.
Use
• To check the Device Caution Information before performing the [ADJUSTMENT
PRINT] when adjusting the PH Skew.
See P.175
For allocating each Bit to the Device Caution Information 1, 2, see the following "Device
Caution Information List."
Setting/
1. Select [CAUTION STATUS] and press the MENU/SELECT key.
Procedure
2. CAUTION STATUS is displayed in hexadecimal number.
168
Field Service Ver. 1.0 May 2006

Advertisement

Table of Contents
loading

Table of Contents