Konica Minolta magicolor 7450 Service Manual page 193

11. SERVICE MENU
N. MAXIMUM DENSITY
Functions • To adjust gradation, color, and image density to target reproduction levels by varying
the maximum amount of toner sticking to paper through auxiliary manual fine-adjust-
ment of gamma of each color after Gradation Adjust.
Use • An image quality problem is not corrected even after Gradation Adjust has been run.
Adjustment • The default setting is "0."
Range
Adjustment To increase the maximum amount of toner sticking, increase the setting value.
Instructions To decrease the maximum amount of toner sticking, decrease the setting value.
Setting/ 1. Select [MAXIMUM DENSITY] and press the MENU/SELECT key.
Procedure 2. Select desired color with the Up key /Down key
key.
3. Select desired setting value with the Up key /Down key
SELECT key.
NOTE
• When the setting has been changed, be sure to run a CALIBRATION/AIDC
process.
P.116
156
Field Service Ver. 1.0 May 2006
-10 to +10
and press the MENU/SELECT
and press the MENU/