Field Service Ver. 1.0 May 2006
8.1.5
Operator Call messages
These messages are displayed when minor error(s) that can be handled by user occur.
The "Error LED " lights while the message is displayed on the Control Panel.
The "Ready LED
" on Control Panel turns OFF during Operator Call.
The Control Panel displays the following when an Operator Call message is displayed.
Display
LCD 1 A Warning icon "
TONER EMPTY).
LCD 2
Message is displayed (for example, REPLACE M).
LCD 3
"
for help" is displayed.
LCD 4
• By pressing the Down key, the panel displays the Help screen.
• In the case of an Operator Call message related to a Toner Cartridge, the toner-remain-
ing level gauge is displayed, and the gauge of the appropriate color flashes (for example,
the M gauge).
• In the case of an Operator Call message for another reason, the printer icon is displayed
with a flashing "Warning icon
Warning icon
Warning message
Key guidance
• For the details of each item, see "Operator Call messages."
See P.90
Description
" is displayed and the state is displayed on the right (for example,
."
TONER EMPTY
REPLACE
M
for help
WASTE TONER FULL
REPLACE BOTTLE
for help
8. Description of the Control Panel
State
Toner-remaining
level gauge
YMCK
4138F3E004DA
Warning icon
Printer icon
4039F3E518DA
85