Konica Minolta magicolor 7450 Service Manual page 128

Field Service Ver. 1.0 May 2006
Priority
LCD1
10 TONER EMPTY
11 I-UNIT LIFE
12 TRAYX SIZE ERR
TRAYX TYPE
13
ERROR
14 MANUAL FEED
PAPER EMPTY
15
TRAYX EMPTY
PAPER ERROR
16
TRAYX PAPER
ERR
Message
LCD2/LCD3
REPLACE
Y
REPLACE
M
The specified color Toner Cartridge has run out.
REPLACE
C
REPLACE
K
REPLACE
Y Service life of the Imaging Unit has been reached.
• This message will be displayed when performing the
REPLACE
M
REPLACE
C
• Monochrome printing is available unless the Imaging
REPLACE
K
The media size set in the printer driver does not match
ADD
that of the media loaded in the specified tray.
SSSS *
• Load "SSSS" size media in the specified tray.
The media size set in the printer driver does not match
ADD
that of the media loaded in the specified tray.
TTTT *
• Load "TTTT" type media in the specified tray.
• During print start-up, media has been loaded in Multi
SSSS *
How to start printing:
TTTT *
1. Press the Up keyr.
2. Press the Down keys, select Tray with Help Menu and
3. Set the media loaded in the Tray 1 again.
• No specified media in Trays 1 to 5.
SSSS * • Tray 3/4 is loaded with the specified media but is not
TTTT *
• Displays when [TRAY CHAINING] is set to [ON].
• No specified media in the specified Tray or Tray 3/4 is
SSSS *
TTTT *
• Displays when [TRAY CHAINING] is set to [OFF].
• The size and type of media specified in the driver is
SSSS *
• A different size of media from the one specified in the
TTTT *
• Displays when [TRAY CHAINING] is set to [ON].
• The size and type of media specified in the driver is
SSSS *
• A different size of media from the one specified in the
TTTT *
• Displays when [TRAY CHAINING] is set to [OFF].
8. Description of the Control Panel
Description
color printing while the [IMAGING UNIT LIFE] is set to
[STOP] on MENU, and Warning Message [I-UNIT
LIFE] is being displayed.
Unit K is at the END. (but not under warranty)
Bypass Tray and is waiting for a print start command.
After the user confirms the media and gives the print
start command, printing starts.
press the MENU key.
set appropriately.
not set appropriately.
not loaded in any Tray.
driver is loaded in the Tray at paper feeding.
not loaded in the specified Tray.
driver is loaded in the specified tray at paper feeding.
91