Konica Minolta magicolor 7450 Service Manual page 97

6. Other
B. Reinstall Procedure
[2]
[5]
[6]
[4]
60
[14]
4037F2C112DB
[1]
4037F2C113DB
[5]
[6]
[3]
4037F2C114DA
Field Service Ver. 1.0 May 2006
Remove the PH Unit [14].
8. Follow the same procedures to
remove all PH Units.
1. Fit the back of the PH Unit [1] into
the plate spring [2] of installation
plate.
2. Push the PH Unit [3] along the right
side line of PH Unit installation plate
all the way and fit it into the plate
spring [4].
3. Make sure that the two bosses [5] at
front and rear side of the PH Unit fit
in the locating hole [6].