Error Messages (Operator Call :); Fuser Unit - Konica Minolta Magicolor 7450 User Manual

Error Messages (Operator Call:
This message...
COVER OPEN
DUPLEX COVER
COVER OPEN
FRONT COVER
COVER OPEN
SIDE COVER
COVER OPEN
TRAYX COVER
FUSER UNIT LIFE
REPLACE

FUSER UNIT

HOLD JOB ERROR
UNABLE TO
STORE JOB
MANUAL EMPTY
"SIZE"
"MEDIA"
MANUAL FEED
"SIZE"
"MEDIA"
Status, Error, and Service Messages
)
means...
The duplex cover is
open.
The printer's front
cover is open.
The printer's right
side cover is open.
The right side cover
of Tray X (Tray 3, 4 or
5) is open.
The fuser unit has
reached the end of its
life.
The specified print job
saved on the hard
disk is sent while the
hard disk is not
installed.
Tray 1 was specified
with the printer driver
as Manual Feed for
printing, but Tray 1 is
empty.
The Paper Source in
the printer driver is
set to Tray 1 (Manual
Feed), but there is
already media in the
tray when printing
begins.
do this...
Close the duplex cover.
Close the front cover.
Close the right side
cover.
Close the right side
cover of the tray.
Contact Technical Sup-
port with the error infor-
mation.
Print jobs can be saved
only if a hard disk is
installed. If desired,
install a hard disk.
Load the correct media
into Tray 1.
Press the Up key to
print, or remove and
reload the media in Tray
1.
195