Error Messages (Operator Call) - Konica Minolta magicolor 1650EN User Manual

Magicolor 1650en user guide
Hide thumbs Also See for magicolor 1650EN:
Table of Contents

Advertisement

Error Messages (Operator Call)

This
message...
AUTH
TIMEOUT
AIDC
ERROR
BELT
ERROR
DUPLEX
UNIT
PANEL
OPEN
DOWNLOAD
IMAGE
INVALID
I/C LIFE
END
PAPER JAM
DUPLEX
PAPER JAM
EXIT
PAPER JAM
FUSER
PAPER JAM
TRANSFER
PAPER JAM
TRAY 2
8-34
means...
The user is automatically
logged off due to IEEE802.1x
port authorization.
AIDC sensor error.
The printer detected incorrect
image position on the image
transfer belt.
Duplex cover is open.
While updating code, an error
has occurred.
The imaging cartridge is
reached the end of its life.
Media has misfed in the
duplex option.
Media has misfed in the fuser
area.
Media has misfed in the trans-
fer roller area. This type of
misfeed means that the media
did not make it to the paper
exit area.
Media has misfed while being
pulled from Tray 2.
Status, Error, and Service Messages
do this...
Reauthorize the IEEE802.1x
port, and then log on.
Open and close front cover
to automatically clean AIDC
parts.
Check the cyan and black
toner cartridges and replace
them if they have run out.
If the error has not been
recovered by this proce-
dure, please call Technical
Support.
Close the duplex cover.
The user should attempt the
upgrade process again.
Replace the imaging car-
tridge.
Locate and remove the mis-
feed.
Locate and remove the mis-
feed.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magicolor1650en

Table of Contents