Error Messages (Operator Call: ) - Konica Minolta bizhub C31P User Manual

Error Messages (Operator Call:
This message...
ADJUST TRAY1
COVER OPEN
DUPLEX COVER
COVER OPEN
FINISHER COVER
COVER OPEN
FRONT COVER
COVER OPEN
SIDE COVER
COVER OPEN
STAPLER COVER
COVER OPEN
TRAYX COVER
COVER OPEN
UPPER COVER
FUSER MISSING
CHECK UNIT
HOLD JOB ERROR
UNABLE TO
STORE JOB
HOLD JOB ERROR
"OPTIONAL"
PRESS CANCEL
MANUAL EMPTY
"SIZE"
"MEDIA"
224
means...
Tray 1 is removed
from the printer.
The duplex cover is
open.
The finisher cover is
open.
The printer's front
cover is open.
The printer's right
side cover is open.
The stapler cover is
open.
The right side cover
of Tray X (Tray 3 or
4) is open.
The upper cover is
open.
The fuser unit is not
installed.
The specified print job
saved on the hard
disk is sent while the
hard disk is not
installed.
When printing a
stored job, the printer
configuration was
changed since the job
was stored.
Tray 1 was specified
with the printer driver
as Manual Feed for
printing, but Tray 1 is
empty.
Status, Error, and Service Messages
)
do this...
Install Tray 1
Close the duplex cover.
Close the finisher cover.
Close the front cover.
Close the right side
cover.
Close the stapler cover.
Close the right side
cover of the tray.
Close the upper cover.
Contact Technical Sup-
port with the error infor-
mation.
Print jobs can be saved
only if a hard disk is
installed. If desired,
install a hard disk.
Change the printer con-
figuration to that when
the job was stored.
Load the correct media
into Tray 1.