Teldat Atlas 250 Installation Manual page 15

Teldat S.A.
CLK=294912 KHz
Date: 02/01/05, Tuesday
SDRAM size: 128 Megabytes
BANK 0: 128 Megabytes (detected)
Caches: ON
FLASH: 8 Mb.
NVRAM: 128 Kb.
EEPROM: 2048 Bytes.
DPRAM: 16384 Bytes.
WAN1: DTE
WAN2: DTE
ISAC
RDSI_B
RDSI_B
FAST ETHERNET 1
FAST ETHERNET 2
PCI device: Host bridge
(Bus: 0, Device: 0, Function: 0)
Current production date: 04 44
Current software license: 6 56
Current serial number: 472/00144
BIOS MAC Add: 00-a0-26-70-00-90
>>
........
TRYING APP CODE DUMP
(CONFIGURED) atlas2g.bin ver.: 0.10.5.1 0.0.0.0 ........
...........................................................
...........................................................
.......................
...........................................................
............
APP DATA DUMP.........................
Running application
Empty configuration used
Initializing
Press any key to get started
As you can see, the text "Empty configuration used" appears in the box. On reaching this point, you can set micro-
switch '5' in the OFF position (it is not necessary to turn off the device). This way, the saved configuration will run
next time you restart the device.
Atlas 250
BUSCLK=65536 KHz L0
Time: 11:25:04
Write-Back
3 Description of the equipment
11