HPE FlexNetwork 5510 HI Series Security Configuration Manual page 353

Task
To establish a connection to an Stelnet server in Release 1121 and later:
Task
Establish a
connection to an
Stelnet server.
Command
interface-number
prefer-compress zlib | prefer-ctos-cipher
{ aes128 | aes256 } | prefer-ctos-hmac { sha1 |
sha1-96 } | prefer-kex
prefer-stoc-cipher { aes128 | aes256 } |
prefer-stoc-hmac { sha1 | sha1-96 } ] *
[ escape character | publickey keyname |
source { interface
interface-number | ipv6 ipv6-address } ] *
Command
•
In non-FIPS mode, establish a connection to an
IPv4 Stelnet
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa |
ecdsa | rsa | { x509v3-ecdsa-sha2-nistp384 |
x509v3-ecdsa-sha2-nistp256 } pki-domain
domain-name } | prefer-compress zlib |
prefer-ctos-cipher { 3des-cbc | aes128-cbc |
aes256-cbc | des-cbc
aes192-ctr | aes256-ctr | aes128-gcm |
aes256-gcm } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 | sha2-256 |
sha2-512 }
{ dh-group-exchange-sha1 | dh-group1-sha1
| dh-group14-sha1 | ecdh-sha2-nistp256 |
ecdh-sha2-nistp384 } | prefer-stoc-cipher
{ 3des-cbc | aes128-cbc | aes256-cbc |
des-cbc | aes128-ctr | aes192-ctr | aes256-ctr
| aes128-gcm
prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 | sha2-256 | sha2-512 } ] * [ dscp
dscp-value | escape character | { public-key
keyname | server-pki-domain domain-name } |
source { interface
interface-number | ip ip-address } ] *
•
In FIPS mode, establish a connection to an IPv4
Stelnet
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { ecdsa |
rsa | { x509v3-ecdsa-sha2-nistp384
x509v3-ecdsa-sha2-nistp256 } pki-domain
340
] [ identity-key rsa
dh-group14
interface-type
server:
| aes128-ctr
| prefer-kex
| aes256-gcm }
interface-type
server:
Remarks
|
|
Remarks
|
Available in user view.
|
|