Configuring A Portal Authentication Server; Configuring A Portal Web Server - HPE FlexNetwork 5510 HI Series Security Configuration Manual

Configuring a portal authentication server

Perform this task to configure the following portal authentication server parameters:
•
IP address of the portal authentication server
•
VPN instance of the portal authentication server
•
Shared encryption key used between the device and the portal authentication server
•
Destination UDP port number used by the device to send unsolicited portal packets to the portal
authentication server
The device supports multiple portal authentication servers.
Do not delete a portal authentication server in use. Otherwise, users authenticated by that server
cannot log out normally.
To configure a portal authentication server:
Step
1. Enter system view.
2. Create
authentication server, and
enter its view.
3. Specify the IP address of
the portal authentication
server.
4. (Optional.)
destination
number
device to send unsolicited
portal
portal
server.

Configuring a portal Web server

Perform this task to configure the following portal Web server parameters:
•
VPN instance of the portal Web server
•
URL of the portal Web server
•
Parameters carried in the URL when the device redirects the URL to users
The device supports multiple portal Web servers.
To configure a portal Web server:
Step
1. Enter system view.
2. Create a portal Web server
and enter its view.
Command
system-view
a portal
portal server server-name
•
•
Set the
UDP port
used by the
port port-id
packets to the
authentication
Command
system-view
portal web-server server-name
To specify an IPv4 portal server:
ip ipv4-address [ vpn-instance
vpn-instance-name ] [ key { cipher
| simple } key-string ]
To specify an IPv6 portal server:
ipv6 ipv6-address [ vpn-instance
vpn-instance-name ] [ key { cipher
| simple } key-string ]
130
Remarks
N/A
By default, no
authentication server
created.
Specify an IPv4
authentication server, an IPv6
authentication portal server, or
both.
By default, no
authentication server
specified.
By default, the UDP port
number is 50100.
This port number must be the
same as the listening port
number specified on the portal
authentication server.
Remarks
N/A
By default, no portal Web server is
created.
portal
is
portal
portal
is