HPE FlexNetwork 5510 HI Series Security Configuration Manual page 134

3. Configure the RADIUS servers:
# Add a user account with 00-e0-fc-12-34-56 as both the username and password on each
RADIUS server. (Details not shown.)
# Authorize ACL 3000 to the user account. (Details not shown.)
Verifying the configuration
# Verify the MAC authentication configuration.
[Sysname] display mac-authentication
Global MAC authentication parameters:
MAC authentication
Username format
Offline detect period
Quiet period
Server timeout
Authentication domain
Max MAC-auth users
Online MAC-auth users
Silent MAC users:
GigabitEthernet1/0/1
MAC authentication
Authentication domain
Auth-delay timer
Re-auth server-unreachable : Logoff
Guest VLAN
Guest VLAN auth-period
Critical VLAN
Critical voice VLAN
Host mode
Offline detection
Authentication order
Max online users
Authentication attempts
Current online users
# Verify that you cannot ping the FTP server from the host.
C:\>ping 10.0.0.1
Pinging 10.0.0.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
: Enabled
: MAC address in lowercase(xx-xx-xx-xx-xx-xx)
Username : mac
Password : Not configured
: 180 s
: 180 s
: 100 s
: 2000
: 2048 per slot
: 1
MAC address VLAN ID
is link-up
MAC address Auth state
00e0-fc12-3456 Authenticated
From port
: Enabled
: Not configured
: Disabled
: Not configured
: 30 s
: Not configured
: Disabled
: Single VLAN
: Enabled
: Default
: 2048
: successful 1, failed 0
: 1
121
Port index